Power
|
| Power is required at each camera location and at the
point where the FinishLynx computer will be operated. See the section on Power Management
to determine whether you need a UPS. |
Start
Cable |
| Start cable can be installed permanently in underground
conduit and provide female XLR-3 outlets at any number of start locations. The only
electrical requirement is that there is continuity for (and no shorting between) each of
pins 1, 2, 3, and the shielding. A single male XLR-3 outlet should be provided near the
location of the timer enabled camera. In this way only two short leads are required to
connect the gun sensor to the nearest female outlet, and the connection box to the nearby
male outlet. For more information, see the section on Start Signals. |
Data
Cable |
| When choosing an Ethernet medium, consider the length of
cables and the suitability of the cables for the conditions to which they will be exposed.
Although 10-Base-T is the preferred medium for data cabling, most 10-Base-T cable is not
suitable for installations where conduit will hold water. |
Camera
Mounting Hardware |
| Before deciding where to mount your cameras you should
read the section on camera locations and lenses. FinishLynx cameras mount on photographic
tripod heads, which in turn are mounted on the thread of a 3/8” bolt, which
preferably will face vertically. This bolt may be provided by a photographic clamp. For a
full list of mounting hardware supplied by Lynx, see the Product List. |
What is
rated suitable for permanent outdoor installation? |
| Generally, FinishLynx equipment is not rated suitable for
permanent outdoor installation. Your power, start and data cabling may be installed in an
outdoor environment if the appropriate quality of cable is used, but mounting hardware,
computers, cameras and Ethernet hubs are not suitable for permanent outdoor installation. |
What do
I do when it rains? |
| All computers, cameras, hubs and any other electrical
devices must be sheltered from the rain. As long as sufficient shelter is provided and
there is a clear field of view from the camera, FinishLynx equipment can still be operated
in inclement weather. |
Outdoor
Computer Use |
| If the FinishLynx computer is being operated outdoors,
consideration should be given to providing shelter from the sun as well as the rain.
Computer screens are very hard to see in direct sunlight. |
